How to Program Ford Key Fobs in Schenectady, NY

If you’ve recently had to replace your Colonie keys, you’ll need to know how to program Ford key fobs in order to get them working again. Our service team at Metro Ford Sales Inc has you covered. Programming a new Ford key fob is simple. Learn more about the process with our service team today to get your vehicle’s keyless entry working like new again.

Step-by-Step Programming Instructions

1. Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door.
2. Next, turn the ignition from OFF to RUN 8 times. Do this within 10 seconds, making sure the 8th time ends on RUN. When you’ve entered programming mode, the door locks will lock and unlock. (Note: If the doors don’t cycle, turn the key faster. Your car may not have keyless entry if you still can’t get the door locks to cycle.)
3. Press any button on the Ford remote to be programmed. Do this within 8 seconds. The door locks will cycle again to confirm the keyless entry remote is programmed and ready to use.
4. Have a second remote key fob? Again, press any button on the remote within 8 seconds to cycle the door locks. Repeat this step for any additional key fobs.
5. Finally, turn the ignition to OFF. The locks will again cycle to confirm programming is complete.

How to Turn Off Ford MyKey near Schenectady, NY

No matter whether you’re selling your Latham vehicle or replacing an old Ford key, there are a few reasons you might want to disable your programmed Ford key and reprogram a new one. In order to start this process, the vehicle needs to be started up with your main admin key. After this is done, you’ll need to follow the instructions listed below to clear your programmed keys’ settings and return each key to the original “admin key” status. Here’s what you need to do:

• Start your vehicle and allow your computer and screen to turn on.
• Using your steering wheel-mounted controls, press the left arrow button to access the main menu.
• From the main menu, press “Settings” after selecting “OK.”
• Once you’re at the “Settings” screen, scroll until you find the “MyKey” option, then press “OK.”
• Under “MyKey,” find the option that says “Clear MyKey.”
• After selecting “Clear MyKey,” press and hold “OK” until you get the “All MyKeys Cleared” message on the screen.

Learn More About Ford Remotes at Metro Ford Sales Inc!

Have more questions about Ford key fob programming or want help with the set-up? Schedule a service appointment with our team at Metro Ford Sales Inc. Our technicians can help you get your key fob reprogrammed and have you back on Albany roads in no time. Have questions in the meantime about our service or even Ford Roadside Assistance? Contact our team.